Graniteland Price Calculator
This calculator is meant as a guide only. For an official quote please send us a drawing & details of your requirements via fax to 01384 566 552, email us at email@example.com, or you can speak to a member of our team on 01384 639000.
Current Selection: Pepperino Dark
To view our full range of colours and select the one you want from our gallery please click on the picture on the left.
Please measure the length and width of each worktop piece that you require and enter them into the boxes below. Include any other measurements that you require for additional work such as a sink cut out , island units etc. Price is based on 30mm thickness granite. Please ensure your measurements are in millimetres mm (1m = 1000mm).
Based on a 620mm depth the longest run we can guarantee without a joint will depend on the material selection for granite and is always 3000mm for quartz stone, ask a member of our team if you have any questions regarding the longest run.
Piece 1 = mm x mm
Piece 2 = mm x mm
Piece 3 = mm x mm
Piece 4 = mm x mm
Piece 5 = mm x mm
Piece 6 = mm x mm
Piece 7 = mm x mm
Piece 8 = mm x mm
These are the edges of the worktop that are visible which would need polishing. Price is based on straight edge polish with chamfer (other edge profiles available on request). Please ensure your measurements are in millimetres.
Total length = mm
Polished cut-outs single aperture
Polished cut-outs are the cut outs for under-mounted sinks etc. that have the inner edges exposed and to be polished, (single hole) carried out on CNC machine.
Double polished cut-outs double aperture
Double polished cut-outs are cut-outs for two under mount sinks next to each other that have the inner edges exposed and polished, (double hole) carried out on CNC machine.
Unpolished cut-outs are the cut-outs with an inner edge that will not be visible when a hob or surface mounted sink etc is to be installed, Manual cut out (un-polished cut).
These are the cut-outs for taps and switch holes, i.e. waste disposal, most tap holes are 35mm standard, if this is not the case then please consult a member of our team.
Drainer Grooves (1 Set = 5 Grooves)
Drainer grooves are four straight grooves (1 set) in the worktop next to the sink which act as a draining board.
The granite is milled down and re-polished to create a drainage area running into the sink. 1 set of drainer grooves is included.
Up-stands can be used instead of tiling the walls. Please measure the total length of up-stands required. Price is based on 70mm high 30mm thickness granite. Please ensure your measurements are in millimetres, if you require anything different to the standard sizes please contact our team.
Total length = mm
Cooker Splash back pieces
This is the piece of material granite or quartz which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splash backs which are positioned on top of the granite work surface to the underside of the wall units.
Measure the length and width in mm of each splash back piece that you require and enter them into the boxes below. Please ensure your measurements are in millimetres, please note that a socket cut is charged at £20 per socket.
Piece 1 = mm x mm
This price is a guide only; there may be extra charges for shaping, special cuts and/or additional mileage costs from our factory in Halesowen. There may also be a reduction in the template, fabrication and fitting charge for very small jobs such as islands, vanity tops etc. For a more accurate quote please submit the form below with a plan attached.
Here at Graniteland we believe that we offer the best value for money for the high quality granite and quartz worktops and services we offer in the UK. If you get a more competitive genuine like-for-like, fully itemised quote that is for the same premium grade granite or quartz, the same high quality fabrication process with the latest CNC technology and can be fitted within 7 working days of template then please send through a copy and we will do our utmost to beat it.
If you would like any further information fill out the form below and submit or email us at firstname.lastname@example.org, fax us on 01384 566 552, or you can speak to a member of our team on 01384 639000.
For further information please complete below and submit the form. Please note that the online quote is for guidance only and is not sent to us when completing the form below.